1993 Phillies Scorebook Retrospective: Game 82 7/4/1993

Ben Revere gets it
Done in Seven; the Padres
Have no where to go

1993 Phillies Scorebook Retrospective: Game 80 7/2/1993 (DH #2)

Delayed, didn't start
'Til the 3rd - Mitch ends it just
After 4 a.m.

1993 Phillies Scorebook Retrospective: Game 78 7/1/93

A Ricky Jordan
Grand Salami lifts the Cards;
Schilling goes Ker-Plunk

2018 Scoresheets

Here it is, the long-awaited update to the 2013 Scoresheet!


Download from One Drive here

Okay, perhaps you haven't been waiting that long...

Updated Features include re-sized columns throughout, giving more room for players' names. I've also added notation for Game Score in the Pitchers faced section - there are two spaces for both versions of Game Score, if you're into that sort of thing.

Post with previous versions of Scoresheets is here.

Coming soon...some more "how-to" posts on Team RISP and Individual LOB.

As always, if you like my scoresheets and use them because you like them so much, please spread the word. I appreciate any and all useful feedback you can muster up.

1993 Phillies Scorebook Retrospective: Game 77 6/30/93

Those Cardinals, they
Tighten the screws as the Phils
Keep playin' the blues

1993 Phillies Scorebook Retrospective: Game 76 6/29/93

St. Lou was hot, the
Phils were hotter; Lenny hits
Number 1000

1993 Phillies Scorebook Retrospective: Game 1 4/5/93

Very first Phillies
win on Opening Day since
1984

5/27/2014 Scranton/Wilkes-Barre Rail Riders 11, Louisville Bats 4

Louisville Slugger Field, Louisville, KY

Game 2 of 4

He pitches left hand...he pitches right hand! I saw it with my own eyes, and I'm here to tell you all about it!!

After hearing about Pat Venditte, drafted by the New York Yankees in both 2007 and 2008 and the game's only active "switch pitcher," many years ago I was immediately intrigued and ever hopeful that one day, I would see him pitch in person. Today, finally, it happened!!

I attended this game with a group from my church...not the same Men's Club that I usually attend a game with once a year. At any rate, I sat in a different section this time...much farther from the action, and mostly obscured by folks endlessly wandering around in the aisles throughout the game. Don't people observe standard baseball etiquette and stay out of the aisles during play? Of course I know they don't...I'm just venting a little bit.

As I arrived at the game, I noticed Venditte's name on the roster for the visiting Scranton/Wilkes-Barre Rail Riders and after my initial shock, I wasted no time informing everyone seated near me that if they got to see Venditte tonight, they'd see something they probably had never seen before. Bruce Billings started for the Rail Riders (I keep wanting to call them Yankees, which they were until this season) so a Venditte appearance would only occur if the appropriate call to the bullpen was made later on.

By the bottom of the 3rd, after a great deal of "call and response" offense by both teams, the Rail Riders were up 3-2. Billings was removed after 2.2 innings, 49 pitches with the bases loaded and I heard those unforgettable words emanating from the PA: "Ladies and Gentlemen, now pitching for the Rail Riders, number 7, Pat Venditte."

I realized immediately that I needed new notation for my scoresheet; I'd never recorded a switch pitcher before. The solution was fairly simple, I added an "L" or an "R" to indicate which paw Venditte was using for a particular batter.

 In case you weren't aware, Venditte's existence in professional baseball literally forced a new rule in the books. Known colloquially as the "Pat Venditte Rule," Rule 8.01(f) specifically states:

A pitcher must indicate visually to the umpire-in-chief, the batter and any runners the hand with which he intends to pitch, which may be done by wearing his glove on the other hand while touching the pitcher’s plate. The pitcher is not permitted to pitch with the other hand until the batter is retired, the batter becomes a runner, the inning ends, the batter is substituted for by a pinch-hitter or the pitcher incurs an injury. In the event a pitcher switches pitching hands during an at-bat because he has suffered an injury, the pitcher may not, for the remainder of the game, pitch with the hand from which he has switched. The pitcher shall not be given the opportunity to throw any preparatory pitches after switching pitching hands. Any change of pitching hands must be indicated clearly to the umpire-in-chief.

Interesting to note that the first batter Venditte faced was Tucker Barnhart, who is a switch hitter. As Venditte indicated he was going to pitch to Barnhart left-handed, Barnhart subsequently entered the batter's box batting right-handed.

Venditte has a special six-fingered glove he uses, here's a photo of that glove from a few years ago:

At any rate, Barnhart connects with Venditte's second pitch for a 2-run single, giving the Bats a 4-3 lead (both runs were charged to Billings). The Bats would hold onto this lead, as starter Josh Smith kept pace with Venditte for the remainder of both of their outings. The game blew wide open in favor of the Rail Riders during the 7th inning when Smith's relief, Pedro VillarERAal (and subsequently, Ryan Dennick) allowed 5 runs on 3 hits. The Rail Riders tacked on 3 more runs in the 8th off of Adam Russell; the Bats never scored after Barnhart's work in the 3rd inning.

Seeing Venditte do his thing...and do it fairly well (3IP, 3H, 0ER, BB, Balk) has been the greatest moment of the season for me, so far...and a difficult one to top!

Rail Riders RF Zelous Wheeler faces RHP Josh Smith

Rail Riders SS Dean Anna (or, DEE NANNA if you like) faces Smith

Bats 2B Ruben Gotay (GOE-tie) faces RHP Bruce Billings

Bats DH Shelley Duncan (a recent call-up, and former Yankees 2nd round 2001 draft pick...also son of Dave Duncan) faces SHP* Pat Venditte (* SHP = Switch Hand Pitcher)

The Mystery Rookie Card game was a little bit different this time around; since I didn't have a guest, per se, I thought it would be fun to pick up 3 cards total - one for me, and the rest for a couple of kids who came along with our church group. A few teenagers aside, there were only 2 kids (both happened to be boys), so the 2 extra I purchased ended up as making prescient sense.

My pick was solid, in my opinion. A nifty 2008 Bowman Gold Daryl Thompson #BDP34. Too bad it wasn't a chrome refractor, but I'm not that picky (at least not with Daryl Thompson).

As it happens sometimes, I have a personal history with one of my picks, and this time it's true. I remember Daryl very well from the 3 partial seasons he spent right here in Louisville (2008, 2009, and 2011)...parts of his 6-year tenure with the Reds organization that ended in October 2011 when he was granted free agency. What I didn't know is how Daryl came to the Reds; as one piece in the trade that sent he and Bill Bray (among others) from Washington in exchange for Austin Kearns (or kEARnS, get it?), Felipe Lopez and Ryan Wagner (none of whom have played in any MLB games since 2013). Thompson spent about a month in the Twins system, pitching for AAA Rochester, and has spent the rest of his career (to date) in various stints with the Independent league Southern Maryland Blue Crabs and the Mexican League Guerreros de Oaxaca, with the exception of 4 games with the AAA Las Vegas 51s in 2013.

The first kid I chose happened to be the son of a guy I know, he was there with his mom and dad. Unfortunately, his dad spent most of the time "away" from the game, on the phone and/or talking to others elsewhere in the stadium. The kid wasn't really there for the game; I found out later he wasn't really a baseball fan, but really enjoyed the concessions and the merry-go-round. He and his folks thanked me for the card; I explained the rules of the game to him and reviewed his random pick: this 2008 Bowman Prospects Luis Munoz #BP88

As the little guy didn't really know anything about baseball, I made sure he knew who the Pirates were (he did), and I also made sure he knew how well the Pirates did last season (he wasn't aware). That's probably the two most flattering things one can say about Munoz; the Dominican signed with the Pirates in 2003 as a 21-year-old and spent 4 full seasons in their organization. After 3 months pitching for AAA Indianapolis and AA Altoona in 2008, he ended up in the Seattle Mariners organization to finish that season with the AA West Tennessee Diamond Jaxx. For the next two years, he bounced around the Mariners system and then fell off the radar. In 2013, he showed up with the Independent Trois-Rivieres Aigles (of the Canadian-American Association) for nearly 2 months.

The second kid I picked was the son of a guy I didn't know; he, too, was there with mom and dad, and unlike kid #1, they stayed in their seats for the entire game, and paid some tight attention as well. When I gave him the card, and explained the rules, he was more than excited to play (and his parents were, too). I got the impression right away that he'd stashed a few baseball cards under his bed during his short life, and also that he liked to play baseball. His pick was also pretty solid, and he knew right off the bat that he had a keeper: this 2008 Topps Matt Joyce #UH123

Joyce was drafted by the Tigers in the 12th round of the 2005 draft, and made his pro debut with Detroit in May of 2008. His value was never higher at the end of that season when he was traded to the Tampa Bay Rays for Edwin Jackson. He spent 2009-2012 bouncing around the Rays system, playing 353 games during that period at the MLB level and garnering an All-Star game nod in 2011. Since the start of the 2013 season, Joyce has been a mainstay of the Rays' lineup and has a .253/.343/.422 line with an OPS of 115+ in 233 games.

My scoresheets, using my new pitch-counting method! Read about it HERE, download the scoresheets for free HERE!

Official Program (featuring Tucker Barnhart) and Scorecard

Ticket

Bat Chat and Gameday Stats

If you enjoy my work, I encourage you to spread the word via Twitter

(I am @yoshiki89), and also please leave a comment!

For Those Of You Scoring At Home: Counting Pitches - Part Three

This is a continuous series of posts where I share some intermediate-to-advanced scorekeeping methods and tips.  The assumption here is that you’ve already made it through “Scorekeeping 101” and are working out ways to improve your skills and expand your enthusiasm for scorekeeping.  I’m also assuming you are using the current version of my customized scoresheet, which you can download for FREE, as I will use it for all of these examples unless otherwise specified.  Get your pencil ready, the game is about to start!

In Part One of this series, I demonstrated my methodology (and notation) for tracking pitches during a game using the current version of my customized scoresheet (you can download it for FREE right here).  In Part Two, I expanded upon this system to reveal my own method for using the same (or similar) notation to track the order of those pitches quickly, easily, and effectively. Before we go any further, it’s important that you revisit what was detailed in both of those posts, as I’m going to build on that for this final topic in the epic “Counting Pitches” trilogy…how to keep track of who’s pitching and to whom, and how to use the notation to tally their respective pitches on the scoresheet.

Wouldn’t life be simpler if, as in the olden days of yesteryear, a pitcher just stayed in the entire game and finish the job he started? Sure it would, but those days are so gone, we can’t even fathom what they were like…even among the geezerest of us all.  As the pitches throughout the game are being tracked with the notation system, part of the purpose of all of this documentation is to have a record of something above and beyond who pitched when. I want to look at a finished scoresheet and deduce, without unnecessary brain-cramp, when they pitched, who they faced, and of course, how many pitches – particularly, how many total pitches and how many of those pitches were strikes.

First of all, let’s revisit the area of the scoresheet in which I track the pitches (and the order of those pitches, if we are so inclined)…the “pitch boxes” found in each Plate Appearance Box; “balls” upstairs, “strikes” downstairs:

Also, if you will recall in Counting Pitches Part One, at the end of that post I briefly touched upon the methodology of counting the pitches, and provided an example of how this happened and where it goes on the scoresheet:

It was here that I first touched on the method of counting the marks in the “pitch box” area, plus what happens (the result of the PA) in the Plate Appearance box. For a 4-pitch walk, I’ll count the 3 notations in the “ball boxes” plus the final notation of “BB” as the fourth pitch; for an 0-2 home run, the 2 notations in the “strike boxes” plus the final notation of HR totals 3 pitches.

The main point in this example, is that the total pitches for each inning are perpetually additive, so where the pitch count in the first inning was 18-13 (18 pitches, 13 strikes) there were 14 pitches, 9 strikes in the 2^nd inning making the total recorded as 32-22 (which is 18 pitches + 14 pitches = 32 total pitches, and 13 strikes + 9 strikes = 22 total strikes). I also pointed out that regarding the balls in play that aren’t in or near the boxes that I’ve been counting as strikes, including the called strike 3 (or swinging strike 3, or ‘foul-tip-to-mitt-caught-for-strike-three,’ there is another type of pitch not recorded in or near those boxes that isn’t in play and still needs to be counted.  That type, of course, is a ball…and it usually happens on the 4^th ball of a walk (BB) or the ball that hits a batter (HP), even if one thinks that ball was a strike.

I’m not trying to beat this to death, but to me, counting inning-by-inning pitch counts in this manner is really important.  After a few innings of only recording totals for each inning only, you’ll need a calculator to understand what’s going on.  Doing it this way, you know how many total pitches have been thrown in 3 innings ‘just like that,’ and you can still tell the difference between one inning and another ‘on the fly’ (without a calculator), letting the fella sitting next to you at the game know “Verlander threw 38 pitches in that inning, only 14 in the previous inning” – even if that fella doesn’t give a darn about that.  For better reasons than that, when that pitcher is finished, his totals (pitches, strikes) are pretty much totaled up, without a calculator (which can spoil a good time at the game, you know).

Here’s the area on the scoresheet where the pitch counts are documented, there’s a big red arrow pointing right to it.  In the first inning (and more often than not, for a few innings afterward) the starting pitcher is on the mound.  Sure, that’s a very broad assumption, and one that dips into the realm of the “blinding flash of the obvious,” but stay with me on this:

I’ve also circled the spot where the pitcher’s jersey number is recorded.  Again, that’s not super important now, in regards to the starting pitcher, but it will be for those who relieve him.

Let’s go ahead and set up a game so I can start recording some of this.  It’s September 2, 2013; the last game of the season for the Louisville Bats as they wrap up a 2-game series against the visiting Indianapolis Indians – LHP Andy Oliver is starting for the Indians.

First Inning: Oliver retires the first 3 batters in order on a flyout to LF and 2 swinging strikeouts.  He does so with 17 pitches, 11 of them were strikes.

Second Inning: Mike Hessman doubles to start the inning, Oliver notches two more swinging strikeouts (one of them on a dropped 3^rd strike), he hits Nevin Ashley and gets Jason Donald to groundout to 3B. 19 pitches, 13 strikes in the inning, so the running total recorded in the pitch area box for the inning is 37 pitches, 24 strikes.

Everybody counts and adds differently, so here’s a tip from me: Instead of counting the pitches for the second inning separately, and then adding to the previous inning totals, I start counting the second inning from the last number counted in the first.  In the above example, I start counting with Oliver’s first pitch to Hessman as “18,” then go through all the pitches to come up with 37 as the total – then I start counting with Oliver’s first strike to Hessman as “12,” then go through all the strikes to come up with 24 total. You can do whatever you want, but there’s only so much time between innings, and personally I don’t like to get behind on this during the game. So, here’s the “running count” for the second inning detail above:

For the third inning, then, Oliver  faces 4 batters, allowing a single and striking out three (all swinging, impressive!) for a total of 52 pitches, 36 strikes so far (over 3 innings of work).

In the fourth inning, Oliver walks Hessman on 5 pitches, then retires the next two batters he faces on popouts, both to the second baseman.  Suddenly, things get weird – the skies open up, torrential rains occur, and the game is held up on a rain delay.  The call is made as Oliver has a 1-0 count on Ashley; I’m a good scorekeeper so I record the time the rain delay started to the left of the PA box.

As the delay approaches the hour mark, one can be sure that once play resumes, there will certainly be a new pitcher. After an hour and 30 minutes, Ryan Reid starts warming up, and it’s official…a rain delay-forced pitching change!

This is an unorthodox manner in which to change pitchers during an inning, especially since it’s occurring in the middle of an at bat, but these things do happen, so this is a great opportunity to demonstrate the notation and methodology.

First things first, I need to “close” Oliver’s account on the scoresheet.  I can’t finalize all of his line score stats, as he is responsible for the runner on first, but I can record what I know now, as well as tally up his final pitch count and add the appropriate graphic notation on the scoresheet so it is apparent when he finished pitching and when the new pitcher took over. Oliver’s final pitch count goes where I’ve been recording it, I’m going to leave some room to the right and add a backwards slash that creeps into the area right above it.

To the left of the PA box, I make a note that Oliver’s count ended with 1-0 (I’m doing this right above my rain delay notation). Since the change is occurring during an AB, at the top of the PA box I record Oliver’s jersey number (41), then a slash with the new pitcher’s jersey number (43).  I also record Oliver’s jersey number only (not Reid’s…at least not yet) in the upper left hand corner of the box above the “pitch count area” that hasn’t been used for anything up to this point.

You can get creative with your own notation, but the rule to follow is simple: whatever you come up with, you need to be able to remember how you did it again and again. For any of my scoresheets where a pitcher changes during an AB, for whatever reason, I follow the same protocol consistently…thus avoiding the “uh, what the hell was this all about” many years later when I’m recalling this game via the document. Some situations arise only once in a blue moon; simplicity and consistency are important.

The game resumes at 4:01pm, I add this to my rain delay notes to the left of Ashley’s AB box and record the total time of the delay. Reid strikes out Ashley on 3 pitches (all of them strikes) to end the inning.  Oliver’s line score can now be closed out, and so can the other totals for the inning (Runs, Hits, Errors, LOB). I record Reid’s total pitch count on the line right above the pitch area box, adjacent to the backslash I left hanging up a little bit, and I also record his jersey number in the upper right hand corner, on the opposite side of Oliver’s number.

Now all this funkiness is as clear as glass on the scoresheet. With traditional scorekeeping methods, tracking this single event would require copious handwritten notes that would threaten to destroy the flow of the scoresheet. With my method, everything is documented cleanly and accurately.  Here’s what we know, just by looking at the detail featured above:

·        41 Andy Oliver faced 15 batters, threw 69 pitches (43 strikes)

·        At the 1-0 count for the 16^th batter he faced, rain delay called at 2:17pm

·        Game resumed at 4:01, at which time 43 Ryan Reid replaced him

·        43 Ryan Reid finished the inning facing 1 batter, threw 3 pitches (3 strikes)

So in that large, previously unused area, it can now be revealed that this is an important method of recording who is pitching and when they are pitching.  Remember, to start the game I didn’t record Oliver’s jersey number up there…he’s the starting pitcher, the “Pitchers Faced” log below indicates this so it isn’t necessary (however, feel free to record his number if you want, in that area at the start of the game…it’s redundant, but that doesn’t really matter).  In the 4^th Inning, in that same area, his number in the upper left corner indicates that he was the pitcher that started that inning. Reid’s number in the upper right corner indicates that he was the pitcher that ended the inning.

Now that I’ve introduced this method of notation, I can carry this through the rest of the game and identify who pitched when, what their pitch count was, and easily identify pertinent info to tally each pitcher’s line score. I detailed one “dotted line” to illustrate this, I’m sure you can visualize the rest…Reid stayed in for the 5^th inning, then was relieved by Graham Godfrey, and so on so forth.

I know you’re rubbing your eyes right now, yes that is Matt Hague brought in during the 9^th inning (in a SAVE situation, no less), who allowed a walk-off Grand Slam to Denis Phipps to end the game. Baseball is crazy, especially Minor League Baseball on the last day of the season, after September callups.

Here are the completed scoresheets for this game.

Now, let’s look at a more traditional pitching change during an inning…it works very much the same way, but with one distinct difference. For this example, let’s go back to Busch Stadium in St Louis, MO, for the 2013 World Series Game 3.  Yes, that’s the game that ended with an obstruction call.  It’s the bottom of the 7^th inning; Jake Peavy started the game, went 4 innings – he threw 63 pitches (43 strikes) and was relieved in the 5^th inning by Felix Doubront, who worked 2 innings, throwing 25 pitches (15 strikes).  The game is tied 2-2, and Craig Breslow is on the mound now, his jersey number is 32 and he’s facing the top of the order.

Breslow faces 2 batters; Matt Carpenter who reaches on a single to SS, and Carlos Beltran who is hit by the first pitch he sees.  Two men on, nobody out; John Farrell decides he has had enough of Breslow’s heroics and brings in Junichi Tazawa to face the righty Matt Holliday.  Before Tazawa is ready to strike, I need to finalize whatever information I can on the scoresheet…which happens to be Breslow’s pitch totals and all of his line score except for the R/ER.

I record his pitch totals in the pitch area, add the backwards slash, but I don’t record Tazawa’s number in the upper right corner yet.  Why? Because he, too, may be relieved by another pitcher…I don’t know yet for sure.  I do know that I need to indicate somehow that Beltran was the last batter Breslow faced, and that Holliday will be the first batter that Tazawa will face.

I’m going to do this in between Beltran’s and Holliday’s AB boxes.  I’m going to do it with a backward slash that “joins” both boxes – in Beltran’s AB box zone, I record Breslow’s jersey number, and in Holliday’s AB box zone, I record Tazawa’s.

Now it’s very clear…Breslow faced Carpenter and Beltran, and Tazawa is taking over. KaBOOM!!

Let’s continue…Holliday doubles, driving in Carpenter and Beltran (Holliday to 3B on the throw).  Well, THAT worked out, didn’t it? Tazawa strikes out Matt Adams and Yadier Molina, walks David Freese (who is replaced by a pinch runner, Daniel Descalso), and the inning ends when John Jay flies out to CF. Now I’m going to update the pitch area with this information. This is what the AB boxes look like.

At a glance, it’s apparent that Breslow is responsible for the two runs that did score…again, having the jersey numbers between the AB boxes provides a quick graphic reference of the pitching change, what happened before it, and what happened after it. I included a second graphic of the same AB boxes (with red border) to illustrate the work of both pitchers.

I update the pitch detail area with Tazawa’s jersey number in the upper right corner, add his total pitch count.  In the Runs/Hits/Errors/LOB fields, the total for the inning is updated, as is Breslow’s line score (but not Tazawa’s yet…he might stay in the the next inning…at a minimum, I’ve recorded what he did this inning in the AB boxes and pitch detail area, but I’m going to leave his line score alone until I know how the bottom of the 8^th is going to start).

For a moment, don’t look at the AB boxes…just focus on the pitch area detail.  Breslow (32) is on the left (started), Tazawa (36) is on the right. Piece of cake.  Two pitchers in the inning, 2 runs, 2 hits, 0 errors, 0 left on base.

Who allowed the hits? Who is charged with the runs? Now you can look at the AB boxes again. Fantastic!!

If Tazawa stays in for the 8^th inning, I don’t have to “carry over” his jersey number or anything…just his running pitch count total. As it turns out, Brandon Workman takes the mound for the bottom of the 8^th, so his number goes in the upper left corner, I finalize his line score, and start anew with his pitch count totals.

It gets a little messier for 3 pitchers in an inning, but still very manageable.  From the same game, but the top of previous inning:

Starter Joe Kelly (58) faced two batters, was replaced by the LOOGY Randy Choate (36) for one batter and didn’t record an out, then was replaced by Seth Maness (61). Once again, I included a second graphic (with red border) of the same AB boxes to illustrate the work of all three pitchers, as indicated by the notation between the AB boxes.

As it was with one pitching change, the pitch detail area looks similar when there are two pitching changes…room is at a premium, but heck…now that you know what you’re looking at, it unfolds like a neat little story.

This graphic notation method really helps out when working out the line score! One no longer has to rely on their memory…let the scoresheet do the work!!

I’d show you what 4 pitchers in an inning looks like, but I don’t want your head to explode.

Here are the completed scoresheets for this game:

This concludes the “Counting Pitches” trilogy for this series, good luck!!

Coming up Next: 
Tracking Team RISP - It's Trickier Than You Might Think

If there are any topics you’d like to see covered in future installments, please let me know here (via comment) or connect with me on Twitter or Facebook!

Here’s hoping I’ll see you at the ball game, and if I do…be sure you have plenty of sunscreen on!!